D-Link DGS-3120-48PC Reference Manual page 423

®
xStack
Restrictions
None.
Example
To display the LLDP port 1 TLV option configuration:
DGS-3120-24TC:admin#show lldp ports 1:1
Command: show lldp ports 1:1
Port ID
-----------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
(None)
Port VLAN ID
Enabled Port_and_Protocol_VLAN_ID
(None)
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
DGS-3120-24TC:admin#
41-10 show lldp local_ports
Description
This command is used to display the per-port information currently available for populating
outbound LLDP advertisements.
Format
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Specified a range of ports to be configured. When port list is not specified,
information for all ports will be displayed.
DGS-3120 Series Managed Switch CLI Reference Guide
: 1:1
: TX_and_RX
: Enabled
:
419
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled