D-Link DGS-3120-48PC Reference Manual page 366

®
xStack
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable IMPB traps and logs:
DGS-3120-24TC:admin# disable address_binding trap_log
Command: disable address_binding trap_log
Success.
DGS-3120-24TC:admin#
34-17 config address_binding recover_learning
Description
This command is used to recover IMPB checking.
Format
config address_binding recover_learning ports [<portlist> | all]
Parameters
ports - Specify the list of ports that need to recover the IMPB check.
<portlist> - Enter the list of port used here.
all - Specify that all the ports will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To recover IMPB checking for ports 6 to 7:
DGS-3120-24TC:admin# config address_binding recover_learning ports 6-7
Command: config address_binding recover_learning ports 6-7
Success.
DGS-3120-24TC:admin#
DGS-3120 Series Managed Switch CLI Reference Guide
362