D-Link DGS-3120-48PC Reference Manual page 683

®
xStack
Format
config sim [{[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-
90> | hold_time <sec 100-255>}]
Parameters
commander - (Optional) Specify to transfer the role to the commander.
group_name - (Optional) Specify that if the user is the commander, the user can update the
name of group.
<groupname 64> - Enter the group name here. This name can be up to 64 characters long.
candidate - (Optional) Specify to transfer the role to the candidate.
dp_interval - (Optional) The time in seconds between discoveries.
<sec 30-90> - Enter the discovery time here in seconds. This value must be between 30 and
90 seconds.
hold_time - (Optional) The time in seconds the device holds the discovery result.
<sec 100-255> - Enter the hold time here in seconds. This value must be between 100 and
255.
Restrictions
Only Administrator level can issue this command.
Example
To transfer to commander:
DGS-3120-24TC:admin#
Command: config sim commander
Success.
DGS-3120-24TC:admin#
To transfer to candidate:
DGS-3120-24TC:admin#
Command: config sim candidate
Success.
DGS-3120-24TC:admin#
To update name of group:
DGS-3120-24TC:admin# config sim commander group_name mygroup
Command: config sim commander group_name mygroup
Success.
DGS-3120-24TC:admin#
To change the time interval of discovery protocol:
DGS-3120 Series Managed Switch CLI Reference Guide
config sim commander
config sim candidate
679