D-Link DGS-3120-48PC Reference Manual page 365

®
xStack
Example
To set the maximum number of DHCP IPv4 snooping entries that ports 1–3 can learned to 10:
DGS-3120-24TC:admin# config address_binding dhcp_snoop max_entry ports 1-3
limit 10.
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10.
Success.
DGS-3120-24TC:admin#
34-15 enable address_binding trap_log
Description
This command is used to send traps and logs when the IMPB module detects an illegal IP and
MAC address.
Format
enable address_binding trap_log
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the IMPB traps and logs:
DGS-3120-24TC:admin# enable address_binding trap_log
Command: enable address_binding trap_log
Success.
DGS-3120-24TC:admin#
34-16 disable address_binding trap_log
Description
This command is used to disable the IMPB traps and logs.
Format
disable address_binding trap_log
DGS-3120 Series Managed Switch CLI Reference Guide
361