D-Link DGS-3120-48PC Reference Manual page 419

®
xStack
DGS-3120-24TC:admin#
Command: config lldp ports 1:1-1:5 admin_status tx_and_rx
Success.
DGS-3120-24TC:admin#
To enable ports 1-2 for manage address entry:
DGS-3120-24TC:admin#
enable
Command: config lldp ports 1:1-1:2 mgt_addr ipv4 192.168.254.10 enable
Success
DGS-3120-24TC:admin#
To configure exclude the system name TLV from the outbound LLDP advertisements for all ports:
DGS-3120-24TC:admin#
Command: config lldp ports all basic_tlvs system_name enable
Success.
DGS-3120-24TC:admin#
To configure exclude the vlan nameTLV from the outbound LLDP advertisements for all ports:
DGS-3120-24TC:admin#
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DGS-3120-24TC:admin#
To configure exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements
for all ports:
DGS-3120-24TC:admin#
enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Success.
DGS-3120-24TC:admin#
To configure exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DGS-3120 Series Managed Switch CLI Reference Guide
config lldp ports 1:1-1:5 admin_status tx_and_rx
config lldp ports 1:1-1:2 mgt_addr ipv4 192.168.254.10
config lldp ports all basic_tlvs system_name enable
config lldp ports all dot1_tlv_pvid enable
config lldp ports all dot1_tlv_protocol_vid vlanid 1-3
415