D-Link DGS-3120-48PC Reference Manual page 167

®
xStack
DGS-3120-24TC:admin# create authentication guest_vlan vlan guestVLAN
Command: create authentication guest_vlan vlan guestVLAN
Success.
DGS-3120-24TC:admin#
16-2 delete authentication guest_vlan (EI Mode Only)
Description
This command is used to delete guest VLAN setting, but won't delete the static VLAN.
All ports which enable guest VLAN will move to original VLAN after deleting guest VLAN.
Format
delete authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Parameters
vlan - Specify the guest VLAN by VLAN name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - Specify the guest VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This ID must be between 1 and 4094.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete guest VLAN configuration:
DGS-3120-24TC:admin# delete authentication guest_vlan vlan guestVLAN
Command: delete authentication guest_vlan vlan guestVLAN
Success.
DGS-3120-24TC:admin#
16-3 config authentication guest_vlan (EI Mode Only)
Description
This command is used to configure security port(s) as specified guest VLAN member.
Format
config authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] [add |
delete] ports [<portlist> | all]
DGS-3120 Series Managed Switch CLI Reference Guide
163