D-Link DGS-3120-48PC Reference Manual page 586

®
xStack
receive. If the specified rate is not multiple of minimum granularity, the rate will be
adjusted.
Restrictions
Only Administrator level can issue this command.
Example
To configure the ports 1:1-1:10 CoS bandwidth queue 1 min rate to 130 and max rate to 100000:
DGS-3120-24TC:admin# config per_queue bandwidth_control ports 1:1-1:10 1
min_rate 130 max_rate 1000
Command: config per_queue bandwidth_control ports 1:1-1:10 1 min_rate 130
max_rate 1000
Granularity: TX: 64. Actual Rate: MIN: 128, MAX: 960.
Success.
62-4 show per_queue bandwidth_control
Description
This command is used to display per port CoS bandwidth control settings.
Format
show per_queue bandwidth_control {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
If no parameter is specified, system will display all ports CoS bandwidth configurations.
Restrictions
None.
Example
Display per port CoS bandwidth control table:
DGS-3120 Series Managed Switch CLI Reference Guide
582