D-Link DGS-3120-48PC Reference Manual page 758

®
xStack
DGS-3120-24TC:admin#show voice_vlan
Command: show voice_vlan ports 1:1-1:5
Ports Status
----- ---------
1:1 Disabled
1:2 Disabled
1:3 Disabled
1:4 Enabled
1:5 Enabled
DGS-3120-24TC:admin#
87-11 show voice_vlan voice device
Description
This command is used to show voice devices that are connected to the ports. The start time is the
time when the device is detected on this port and the activate time is the latest time the device
sent traffic.
Format
show voice_vlan voice_device {ports <portlist>}
Parameters
ports - (Optional) Specify the list of ports to be configured here.
<portlist> - Enter a list of ports used to be displayed here.
Restrictions
None.
Example
To display the voice devices that are connected to the ports 1-5:
DGS-3120 Series Managed Switch CLI Reference Guide
Mode
--------------
Auto Untagged
Auto Untagged
Auto Untagged
Auto Untagged
Auto Untagged
754
ports 1:1-1:5