Disable Sharing - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Configuring Slots and Ports on a Switch

disable sharing

disable sharing [<port>]

Disables a load-sharing group of ports.

Syntax Description

Usage Guidelines

This command increases bandwidth tracking and resiliency.

On a modular switch,

is the port configured as the load-sharing master port. For a detailed explanation of port specification,

see "Modular Switch Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.

The following command disables sharing on master logical port 9, which contains ports 9-12 on a

stand-alone switch:

disable sharing 9

The following command disables sharing on master logical port 9 in slot 3, which contains ports 9

through 12 on a modular switch:

disable sharing 3:9

This command was first available in ExtremeWare 2.0.

This command was modified in ExtremeWare 4.0 to support modular switches.

Platform Availability

This command is available on all platforms.

Specifies the master port of a load-sharing group. On a modular switch, is a

combination of the slot and port number, in the format <slot>:<port>.

is specified as <

slot>:<port number>

. On a stand-alone switch,

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0