Show Mpls Rsvp-Te Profile - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
MPLS Commands—BlackDiamond Switch Only
show mpls rsvp-te profile
show mpls rsvp-te profile {<profile_name>}
Description
Displays the RSVP-TE path profile.
Syntax Description
profile_name
Specifies the name of the profile.
Default
N/A
Usage Guidelines
By default, this command displays all configured profile parameters for the specified profile. If the
profile name is omitted, the profile parameter values for all configured LSP profiles are displayed.
Example
The following command displays the profile parameter values for all configured LSP profiles:
show mpls rsvp-te profile
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2590
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?