Configure Mpls Rsvp-Te Add Lsp - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands—BlackDiamond Switch Only

configure mpls rsvp-te add lsp

configure mpls rsvp-te add lsp <lsp_name> path <path_name> {<profile_name>}
{primary | secondary}
Description
Adds an RSVP-TE LSP.
Syntax Description
lsp_name Specifies the LSP name.
path_name Specifies the path name
profile_name Specifies the profile name.
primary Specifies the primary LSP.
secondary Specifies a secondary LSP.
Default
N/A
Usage Guidelines
Both the and
<lsp_name>
string that is to be used to identify the LSP within the switch. The
an alphabetic character and can contain up to 31 additional alphanumeric characters. The
is optional. If omitted, the default profile is applied to the LSP. If no explicitly
<profile_name>
specified, the
<path_name>
is configured. The maximum number of configurable LSPs is 1024.
Example
The following command adds a primary RSVP-TE LSP that takes the routed path named
paththroughdenver:
configure mpls rsvp-te add lsp lsptonyc path paththroughdenver
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2532
must be specified. The
<path_name>
defaults to the primary path. The LSP is immediately signaled as soon as it
parameter is a character
<lsp_name>
string must begin with
<lsp_name>
ExtremeWare 7.7 Command Reference Guide