Configure Lldp Reinitialize-Delay - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
configure lldp reinitialize-delay
configure lldp reinitialize-delay <seconds>
Description
Configures the delay that applies to a re-initialization attempt after LLDP ports were disabled or the
link went down.
Syntax Description
seconds
Default
The default is 2 seconds.
Usage Guidelines
N/A.
Example
The following command configures a re-initialization delay of 10 seconds after LLDP ports were
disabled or the link is lost.
configure lldp reinitialize-delay 10
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
ExtremeWare 7.7 Command Reference Guide
Specifies the delay that applies to the re-initialization attempt. The range is 1 -
10 seconds.
configure lldp reinitialize-delay
2425
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?
Questions and answers