Show Mpls - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands—BlackDiamond Switch Only

show mpls

show mpls {vlan <vlan name>} {detail}
Description
Displays MPLS configuration information for one or all VLANs. Omitting the vlan keyword displays
information for all VLANs.
Syntax Description
vlan name Specifies a VLAN name.
detail Specifies to display the information in detailed format.
Default
N/A
Usage Guidelines
When the parameter is omitted, this command displays the values of all MPLS configuration
vlan
parameters that apply to the entire switch, the current status of peer LSRs, and a list of the VLANs for
which MPLS is enabled.
When the parameter is specified, this command displays the current values of the MPLS
vlan
configuration parameters that are specific to the VLAN.
If the optional keyword is specified, additional detailed VLAN information is displayed.
detail
Example
The following command displays MPLS configuration information for the VLAN accounting:
show mpls vlan accounting
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2578 ExtremeWare 7.7 Command Reference Guide