Configure Mpls Vpls Delete Peer - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands—BlackDiamond Switch Only

configure mpls vpls delete peer

config mpls vpls <vpls_name> delete peer [<ipaddress> {vcid <vcid>} |
<host_name> {vcid <vcid>} | all]
Description
Deletes a VPLS peer from the specified vpls_name.
Syntax Description
vpls_name Identifies the VPLS within the switch (character string)
ipaddress Specifies the IP address for the peer node that is the endpoint of the VC-LSP
host_name Specifies the peer host name.
vcid Qualifies a specific core-to-spoke Martini VC-LSP.
all Deletes all VPLS peers.
Default
N/A
Usage Guidelines
This command deletes a VPLS peer from the specified vpls_name. When the VPLS peer is deleted, VPN
connectivity to the VPLS peer is terminated. The optional
qualify a specific core-to-spoke Martini VC-LSP. The all keyword may be used to indicate that all VPLS
peers be deleted.
Example
None
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2566
keyword may be specified to fully
vcid
ExtremeWare 7.7 Command Reference Guide