Extreme Networks ExtremeWare Command Reference Manual page 2548

Hide thumbs Also See for ExtremeWare:

Table of Contents

MPLS Commands—BlackDiamond Switch Only

The following command configures the attributes for the specified profile:

configure mpls rsvp-te profile customer1 ping-interval 2

This command was first available in an ExtremeWare IP Technology Services Release based on

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare 7.7 Command Reference Guide

Extremeware 7.7