Show Fdb Vpls - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands—BlackDiamond Switch Only

show fdb vpls

show fdb vpls {<vpls_name>} {peer [<ipaddress> | <host_name>]}
Description
Displays FDB information learned for VPLS.
Syntax Description
vpls_name Displays FDB information only for the specified vpls.
ipaddress Specifies the peer.
host_name Specifies the peer. Must be able to be resolved to an IP address.
Default
N/A
Usage Guidelines
This command displays FDB information learned for VPLS. MAC addresses learned on both the egress
VLAN (if applicable) and VC-LSPs are displayed. Information displayed includes the MAC address,
VPLS name, egress VLAN (if applicable), VC-LSP peer, Age, and Port List. Optionally specifying the
displays FDB information for the specified vpls only. If a VPLS peer qualifies the command,
vpls_name
only FDB information learned from the specified peer is displayed. The peer is specified using the
ipaddress or host_name parameter.
Example
None
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2574 ExtremeWare 7.7 Command Reference Guide