Show Mpls Forwarding - Extreme Networks ExtremeWare Command Reference Manual

Version 7.7
Hide thumbs Also See for ExtremeWare:
Table of Contents

Advertisement

show mpls forwarding

show mpls forwarding {summary | detail | inactive | host <ipaddress>
{detail | inactive} | prefix <ipaddress/masklength> {detail | inactive} |
rsvp-te <ipaddress> {detail}}
Description
Displays information from the FEC-to-NHLFE database, used when forwarding non-MPLS packets onto
an LSP. Also displays information for RSVP-TE LSPs.
Syntax Description
summary
Displays only the summary route information associated with labeled paths.
host
Displays information for a single FEC.
prefix
Displays information for a single FEC.
rsvp-te
Displays only the RSVP-TE forwarding label mapping
inactive
Causes inactive mappings to be displayed. This keyword does not apply to the rsvp-te keyword,
because RSVP-TE operates in DoD mode.
Default
N/A
Usage Guidelines
This command displays information from the Forwarding Equivalence Class (FEC)-to-Next Hop Label
Forwarding Entry (NHLFE) database. This command also displays information for RSVP-TE LSPs.
If the
or
host
the
summary
By default, the information displayed includes:
• Next hop IP address
• Outgoing label
• Interface number of the outgoing VLAN
If the
detail
• Outgoing port number
• Counts of packets and bytes that have been transmitted using the database entry
By default, information is displayed for active mappings. To display information for liberally-retained
inactive mappings, use the inactive keyword. An inactive mapping is a mapping that was received from
an LDP peer, but is not being used to reach the associated FEC. Using the
inactive mappings to be displayed. The inactive keyword does not apply to RSVP-TE LSPs, because
RSVP-TE operates in downstream-on-demand mode.
ExtremeWare 7.7 Command Reference Guide
keywords are specified, summary information is displayed for a single FEC. Use
prefix
keyword to display summary route information associated with labeled paths.
keyword is specified, the following additional information is displayed:
show mpls forwarding
keyword causes
inactive
2579

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware 7.7

Table of Contents