Show Mpls Vpls - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands—BlackDiamond Switch Only

show mpls vpls

show mpls vpls {summary | detail | <vpls_name> {detail | | peer
[<ipaddress> | <host_name>]} | peer [<ipaddress> | <host_name>] {detail}}
Description
Displays VPLS configuration and status information.
Syntax Description
summary Displays summary counts.
vpls_name Displays information for the specified vpls.
detail Displays additional information in comprehensive detail format.
ipaddress Displays all VPLS instances of which the peer is a member, as specified.
host_name Displays all VPLS instances of which the peer is a member, as specified.
detail (peer) Specifies all VPLS.
Default
N/A
Usage Guidelines
This command displays VPLS configuration and status information. The
(without specifying any optional parameters) displays all currently configured VPLS instances for the
switch. Information displayed includes the VPLS name, IP addresses of peers, peer mode, VC-LSP state,
and local egress VLAN or ports. If the
vpls. If the
optional detail
comprehensive detail format. The detail format additionally displays transmit and receive packet and
byte counts. Optionally, specifying the peer keyword qualified by the
VPLS information for the specified peer in detailed format. If the peer keyword is specified and is
unqualified by a vpls_name, all VPLS instances that the peer is a member of are displayed. The
keyword displays a set of summary counts. The counts include the number of VPLS instances,
configured VPLS peers, active VPLS peers, targeted LDP sessions, VC-LSPs, and errors.
Example
None
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch.
2592
is specified, information is displayed for the specified
vpls_name
keyword is specified, additional information is displayed in
command
show mpls vpls
or
ipaddress host_name
ExtremeWare 7.7 Command Reference Guide
, displays
summary