ISL Trunking Commands
If the command is specified without an operand, you are prompted to enter a
value.
Example
Setting the speed level for all ports on a switch to 2 Gbit/sec:
See Also
Also see the following related commands:
switchcfgtrunk
Syntax
This command uses the following syntax:
Availability
This command is available to admin users only.
Description
Use this command to enable or disable trunking on all the ports of a switch.
Note:
52
1 - 1 Gbit/sec mode. The port will be at fixed speed of 1 Gbit/sec.
2 - 2 Gbit/sec mode. The port will be at fixed speed of 2 Gbit/sec.
switch:admin> switchcfgspeed 2
Committing configuration...done.
switch:admin>
portcfgspeed
switchshow
switchcfgtrunk <0|1>
This command requires the Trunking license.
ISL Trunking Version 3.1.x/4.1.x User Guide