AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 434

Lines and Trunks
Console Display/Instructions
4 Save your entry.
Enter Enter
Select .
5 Specify the pool line(s).
NNN
_
_
_
_
Single Line Procedure
1 Specify entry mode.
Entry Mode Entry Mode
Select
2 Enter the line/trunk number for the pool.
NNN
3 Assign or remove the line/trunk from the pool.
Enter Enter
Select or
Delete Delete
.
4 Return to the System Programming menu.
Exit Exit
Select two times.
4–62
Programming Procedures
xxx = pool dial-out code entered in Step 3
_
For a single line/trunk, go to
Single Line Procedure.
For a block of lines/trunks go to
Block Procedure.
.
xxx = pool dial-out code entered in Step 3
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
You may continue to assign or remove
additional lines/trunks from the pool by
repeating Steps 2 and 3.
Additional Information
*
[ sspp ]
#
[ nnn ].
PC