AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 115

Using SPM
2 Type your login name and press
3 Type the IS II/III password and press
4 Type for the terminal emulation type and press
If you are working with IS II, the IS II main menu appears.
If you are working with IS III, the system prompts you for your login
registration. After you enter your login and press
menu appears.
5 To exit from IS II/III programming, press
The system prompts you for confirmation that you want to exit. After confirmation
the following message appears.
Password
The Password option is used by qualified service personnel to change the
modem connection password. A password is always required to establish a
connection with the built-in modem. The password always consists of seven
characters. You can perform remote system programming only if you enter the
password correctly. A default password is set at the factory. You must obtain this
password from your system consultant (SC).
Follow the steps below to change the modem connection password.
1 At the SPM Main Menu, press
4
.
4
4
.
( ).
to select .
Programming with SPM
.
4
, the IS III main
2–37