AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 38

Programming Procedures
System Programming Hierarchy
The following table shows all of the options that are available under each of the
System Programming main menu options displayed on the system programming
console. Following the option name is a brief description of the option and the
page number where detailed instructions can be found.
Main menu options are shown in a separate box. First level options are bold,
second level options are preceded by an asterisk (*). The remaining levels are
shown with increasing amounts of indentation.
System
Restart
SProg Port
Mode
* Key
* Hybrid/PBX
* BehindSwitch
Board Renum
MaintenBusy
* Enable
- Auto Busy
Tie Trunks
- Enable
- Disable
* Disable
Date
Time
Back/Restore
* Backup
* Restore
* Auto Backup
- Off
- Daily
- Weekly
SysRenumber
Default Numbering
* 2-Digit
* 3-Digit
* SetUp Space
1–22
Programming Basics
Description
Restart the system (cold start)
Extension used for system programming
Sets the system mode. See Equipment
and Operations
Renumber boards that have already been installed
Enable Automatic Maintenance Busy
Disable Automatic Maintenance Busy
System date
System time
Backup system programming to a memory card
Restore system programming from a memory card
Automatic backup
Turn off automatic backups
Daily backups of system programming
Weekly backups of system programming
Description
Default extension numbering plans
Page
4–2
3–4
4–7
4–5
4–8
3–8
3–10
3–225
4–335
3–228
Page
4–14