AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 248

Optional Group Features
Console Display/Instructions
6 Assign or remove the extension from the call pickup group.
Enter Enter
Select or
Delete Delete
.
7 Assign or remove extensions for another call pickup group or go to Step 8.
Next Next
Select
8 Return to the System Programming menu.
Exit Exit
Select two times.
Group Paging
Use this procedure to assign or remove an extension from a paging group. A
paging group consists of telephone users who hear common announcements
over the telephone speakerphone. Only MLX telephones and analog multiline
telephones with speakerphones can be members of a paging group.
A maximum of six paging groups with a maximum of 10 extensions per group is
allowed. A seventh paging group, called the Page All group, is not limited and
includes all telephones connected to the system. Extensions cannot be added to
or removed from the Page All group.
Summary: Group Paging
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
3–112
Common Administrative Procedures
Additional Information
You may continue to assign or remove
extensions from the call pickup group by
repeating Steps 5 and 6.
Return to Step 5 to continue programming. The
next extension will be displayed on Line 1.
System manager
All
Not required
Form 7b, Group Paging
Not applicable
Extension number
Yes
No
Extensions
More Group Page
Enter
Dial ext. no.
Type paging group no.
ext. no.
Dial paging group no.
Enter Exit Exit
PC
Type