AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 93

Accessing SPM
If the PC is in a remote location and your system has not activated the
Remote Access feature, do the following:
Use the main telephone number to place a voice call to the system on
the line to which the modem is connected.
Instruct the operator to transfer you to the modem (by pressing
Transfer, dialing
To put the modem on line, type
the telephone.
NOTE:
If you enter a telephone number of fewer than 11 digits, you must end it with a
pound sign (#).
To access SPM through a local or remote modem connection, follow the steps
below.
1 Set up the appropriate physical connections between the PC and the control
unit. See "Connecting the PC."
2 Type and press
X.XX
If you wish to program in a language other than the current language set for
SPM, see "Set the Programming Language."
3 Press any key to display a blank screen on which you can enter modem
commands. (You may have to press the key several times.)
4 Make a data connection to the modem of the control unit.
See "Modem Connections." When the connection is made, the password prompt
appears as shown in Step 4.
5 Type the SPM password to display the SPM Main Menu shown in Step 6.
The password does not display as you type it.
, then hanging up the telephone).
4
to display the SPM Welcome screen shown below.
X.XX = current version of SPM
4
and press , then hang up
Programming with SPM
2–15