AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 413

Lines and Trunks
Console Display/Instructions
2 Go to the second screen of the Lines and Trunks menu.
3 Select Hold Disconnect Interval.
_
4 Specify the hold disconnect line(s).
_
_
_
_
Single Line Procedure
1 Specify entry mode.
Entry Mode Entry Mode
Select
2 Enter the number of the line or trunk with a long disconnect interval.
Press More.
For a single line, go to
Single Line Procedure.
_
For a block of lines, go to
Block Procedure.
.
Dial or type [ nnn ].
Additional Information
Programming Procedures
PC
4–41