AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 376

Basic System Operating Conditions
If you are programming on the console, be aware of the following:
The console must be connected to the extension currently assigned for
system programming.
As soon as you change the system programming extension, the system
programming session is terminated. To proceed with system
programming, you must connect the system programming console to the
newly assigned extension and enter system programming again.
NOTE:
The telephone used for system programming must be an MLX-20L.
See Chapter 3, "Common Administrative Procedures" for detailed information.
Summary: System Programming Position
Assignment
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Language
Use this procedure to set the system language (English, French, and Spanish)
for the following options:
System language.
Station Message Detail Recording (SMDR) reports. See "System
Features."
Print reports. See "Printing Reports."
Extensions. See "Optional Telephone Features."
4–4
Programming Procedures
System manager
All
Not required
Form 1, System Planning
First extension jack on the first MLX module (also set as an
operator position)
Extension number of one of the first five extension jacks on
the first MLX module
No
No
System SProg Port
Exit
2
+
Drop Dial ext. no.
Type ext. no.
Enter