AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 433

Lines and Trunks
PC Procedure
Procedure: Trunks to Pools Assignment
Console Display/Instructions
1 Select the Lines and Trunks menu.
_
2 Select Pools.
3 Enter the pool number.
To program a block of lines/trunks:
LinesTrunks Pools
block of lines/trunks
Exit
To program a single line/trunk:
Type pool dial-out code
no. of the line/trunk
To program a block of lines/trunks:
Type pool dial-out code
of lines/trunks Toggle letter R On/Off
Additional Information
_
Dial or type [ nnn ].
Dial pool dial-out code
Enter
Toggle LED On/Off
Programming Procedures
Select
Exit
Type
Select block
PC
4–61