AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 313

System Features
Extension Procedure
Console Display/Instructions
1 Specify the extension to which calls are to be redirected.
2 Save your entry.
Enter Enter
Select .
3 Return to the System Programming menu.
Exit Exit
Select .
Group Calling Procedure
1 Enter the extension of the calling group to which calls are to be redirected.
2 Save your entry.
Enter Enter
Select .
3 Return to the System Programming menu.
Exit Exit
Select .
Host System Dial Codes for Behind Switch
Mode
Use this procedure to assign the host system dial codes for the Transfer,
Conference, and Drop features.
When multiline telephone users press the Transfer, Conference, or Drop
button, a signal is sent to the host service and the communications' system
features are not accessed. Assigning dial codes to these features ensures that
users can take advantage of them through the host system.
NOTE:
This procedure applies to Behind Switch mode only.
Additional Information
SP: "Entering an Extension"
Dial or type [ nnnn ].
Common Administrative Procedures
PC
3–177