AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 422

Lines and Trunks
Console Display/Instructions
3 Select QCC Operator.
_
4 Specify the QCC operator extension.
5 Save your entry.
Enter Enter
Select .
6 Specify the line(s) associated
with the QCC operator.
NNNN
_
_
_
_
Single Line Procedure
1 Specify entry mode.
Entry Mode
Entry Mode
Select
2 Enter the line/trunk assigned to ring into the QCC queue.
NNNN
4–50
Programming Procedures
Press More.
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 6.
On = operator receiving calls.
Off = operator not receiving calls.
xxxx = extension number entered in Step 4
_
For a single line/trunk, go to
Single Line Procedure.
For a block of lines/trunks, go to
Block Procedure.
.
xxxx = extension number entered in
Step 4
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
Additional Information
*
[ sspp ]
#
[ nnn ].
PC
Û