Print Reports - AT&T MERLIN LEGEND Release 3.1 System Programming Manual

Print Reports

Print Reports
Use the procedures in this section to change the language for system reports
and to print the system reports.
Report Language
Use this procedure to change the language of the system reports. It applies to
Release 1.1 and higher. Unless you change the report language, reports are
printed in the language chosen as the system language.
Summary: Report Language
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure More
PC Procedure
Printing System Reports
The communications system can be used to print a variety of reports. You can
print individual reports or use the
reports, including all report sections and options. See Appendix F for samples of
the print reports.
Use this procedure to print the reports listed below. With the exception of Trunk
Information, the dash lists under the bullets show the sections of each report that
automatically print when the report option is selected.
All
Each report
All report options
System Set Up
System Dial Plan
4–318
Programming Procedures
System manager
All
Not required
Form 1, System Planning
English
English, French, Spanish
No
No
option to print the entire set of available
or
or or
or