Auxiliary Equipment
Loudspeaker Paging
Use this procedure to identify the line/trunk jack reserved for connection of
loudspeaker paging equipment.
NOTES:
1. If you use equipment that rebroadcasts music or other copyrighted
materials, you may be required to obtain a copyright license from and pay
license fees to a third party (such as the American Society of Composers,
Artists, and Producers or Broadcast Music Incorporated). Magic on Hold
â
requires no such license and can be purchased from your AT&T dealer.
2. A maximum of three single-zone or multizone loudspeaker paging
systems can be connected to the system.
3. You cannot assign the line/trunk identified for loudspeaker paging
equipment use to a line/trunk pool. If the line/trunk is currently assigned to
a pool, you must remove it before you program this option.
4. You cannot assign the line/trunk identified for loudspeaker paging
equipment use as a Remote Access line/trunk, and you cannot use its
jack for Music on Hold or maintenance alarm.
Summary: Loudspeaker Paging
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All, but in Hybrid/PBX mode the line/trunk designated for
loudspeaker paging cannot be assigned to a line/trunk
pool.
Line/trunk idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk numbers
Yes
No
Type line/trunk no.
Dial line/trunk no.
Programming Procedures
4–203
Need help?
Do you have a question about the MERLIN LEGEND Release 3.1 and is the answer not in the manual?