AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 508

PRI Facilities
Console Display/Instructions
8 Assign or remove the B-channel from the group.
Enter Enter
Select or
Delete Delete
.
9 Continue to assign B-channels to another group or go to Step 10.
Next Next
Select .
10 Save your entry.
Enter Enter
Select .
11 Select Lines.
_
12 Enter the B-channel group number ( nn = 1 to 80).
13 Save your entry.
Enter Enter
Select .
14 Specify the line(s).
_
_
_
_
4–136
Programming Procedures
You may continue to assign or remove
additional B-channels from the group by
repeating Steps 7 and 8.
Return to Step 7. The next group will be
displayed on Line 1.
Dial or type [ nn ].
NN
xx = number entered in Step 12
_
To select a single line, go to
Single Line Procedure.
To select a block of lines, go to
Block Procedure.
Additional Information PC