AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 469

Tie Trunks
Procedure: Direction
Console Display/Instructions
1 Select the Lines and Trunks menu.
_
2 Select TIE Lines.
_
3 Select Direction.
_
4 Enter the tie trunk number.
5 Save your entry.
Enter Enter
Select .
Additional Information
Dial or type:
Trunk number [ nnn ]
*
Slot and port number

Logical ID number [ nnn ].
If you get the Trunk Busy message, wait
for an idle condition or exit system
programming and try again later.
Programming Procedures
PC
[ sspp ]
4–97