AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 196

Telephones
Console Procedure To program a single line/trunk:
PC Procedure
Procedure: Assign Trunks or Pools to Telephones
Console Display/Instructions
1 Select the Extensions Menu.
2 Select Lines and Trunks.
_
3 Specify the extension.
3–60
Common Administrative Procedures
Extensions Lines/Trunks
ntry Mode
E
Dial line/trunk no.
To program a block of lines/trunks:
Extensions Lines/Trunks
Select trunk range Toggle LED On/Off
Exit
To program a single line/trunk:
Type ext. no.
To program a block of lines/trunks:
Type ext. no.
G
Toggle letter On/Off
Additional Information
_
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 5.
On = extension is assigned to
trunk or pool.
Off = extension is not assigned
to trunk or pool.
Enter
Dial ext. no.
Enter Exit Exit
Enter
Dial ext. no.
Enter Exit
Type line/trunk no.
Select trunk range
PC