AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 342

Labeling
Posted Message
Use this procedure to add or change existing posted messages. The posted
messages allow callers with display telephones to know why the called extension
does not answer.
Each posted message can have a maximum of 16 characters. Messages 2
through 20 can be changed through programming. Message 1, Do Not Disturb,
cannot be changed.
Summary: Posted Message
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure More
PC Procedure
Procedure: Posted Message
Console Display/Instructions
1 Go to the second screen of the System Programming menu.
2 Select the Labeling menu.
_
3–206
Common Administrative Procedures
System manager, Integrated Administration
All
Not required
Form 8a, Label Form: Posted Message
First 10 messages
1 to 20
No
No
Drop Enter message
Type message no.
Type message
Additional Information
Press More.
Dial message no.
2
+
PC