System Programming - AT&T MERLIN LEGEND Release 3.1 System Programming Manual

System Programming

5 Observe the restore progress screen.
To abort the restore press
6 When the restore completes, press
System Programming
A primary function of SPM is to provide a method for programming the
communications system. The Sys Program option gives you access to all of the
system programming features available from the system programming console.
Basic Programming Information
To begin programming, you must perform one of the following to display the
System Programming menu on the console or PC:
On the console:
On the PC:
In most cases, you can press
any changes. Exceptions to this are noted as part of a procedure. When you
complete a procedure and press
the menu hierarchy. Occasionally, when you press
previous screen. In a few cases , pressing
Programming menu where you can select another option to program or exit from
system programming.
To complete a procedure and save the information you have programmed,
press
2–42
Programming with SPM
xx = approximate number of minutes
NN
filename = name entered in Step 5
xxxx = number of blocks
+ . You return to the SPM Main Menu.
xxxx = number of blocks sent
®
Menu
®
spm
Type
or
( ).
to return to the SPM Main Menu.
®
® ® ®
Press any key
to exit from a screen without making
( ), you usually move up one screen in
( ), you return to the
brings you back to the System