AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 545

PRI Facilities
Console Display/Instructions
5 Select an option.
_
_
_
_
Pattern Procedure
1 Enter the table number ( n = 0 to 7).
2 Save your entry.
Select .
3 Erase the current pattern ( nnnn ).
nnnn
4 Enter the pattern to be matched.
5 Continue to assign the pattern to another table or go to Step 6.
Select .
If you select
Pattern Procedure.
If you select
Operator Procedure.
If you select
Type Of Number Procedure.
If you select D
Delete Digits Procedure.
Press the button or function key next to
your selection.
Dial or type [ n ].
N
x = number entered in Step 1
Press Drop.
Dial or type [nnnn].
Return to Step 3. The next table will be
displayed on Line 1.
Additional Information
, go to
, go to
, go to
, go to
Programming Procedures
PC
F
4–173