AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 607

Optional Group Features
Console Procedure
PC Procedure
Group Coverage Delay Interval
Use this procedure to specify the number of rings before a call is sent to group
coverage receivers.
Summary: Group Coverage Delay Interval
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Group Calling Member Assignments
Use this procedure to assign or remove an extension from a calling group. A
calling group is used to direct calls to a group of people who all handle the same
type of call. A single extension number is assigned to the group and is used by
both inside and outside callers to reach the group.
To reassign an extension to a new calling group, you must remove it from its old
group before programming the new assignment.
More
Dial ext. no.
Type group no.
System manager
All
Not required
Form 7c, Group Coverage
Not applicable
Extension numbers
Yes
No
More
number of rings
Dial group no.
Type ext. no.
Drop
2
+ Type the number of rings
Programming Procedures
Dial the
4–235