AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 160

System Operator Positions
The system programming console can have several incoming calls ringing
simultaneously.
Each CMS requires two DLC operator positions to connect the equipment and
one position to serve as CMS supervisor.
Summary: Identify or Remove DLC Operator
Positions
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Identify or Remove DLC Operator
Positions
Console Display/Instructions
1 Select the Operator menu.
_
2 Select Positions.
_
3–24
Common Administrative Procedures
System manager
All
System idle
Form 2a, System Numbering: Extension Jacks
Type: DLC
First or fifth extension jack on MLX module (maximum: two
per module; maximum: eight DLCs per system)
Yes
No
Type ext. no.
Additional Information
Dial ext. no.
PC