AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 328

Night Service
Console Display/Instructions
5 Save your entry.
Select .
Extensions Procedure
1 Specify the extension you want to assign to the Night Service group.
2 Assign or remove the extension(s) from the Night Service group.
NNN
3 Return to the System Programming menu.
Select two times.
3–192
Common Administrative Procedures
If you selected
Extensions Procedure.
If you selected
Calling Group Procedure.
NNNN
xxxx = number entered in Step 4
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Then, go to Step 3.
On = extension assigned to group.
Off = extension not assigned to group.
NNNN
xxxx = number entered in Step 4
Select
continue adding or removing extensions
from the Night Service group by
repeating Steps 1 and 2.
Select
begin assigning extensions to the next
Night Service group (operator position).
Additional Information
in Step 3, go to
in Step 3, go to
to assign or
to remove your entry and
to save your entry and
PC