AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 687

Labeling
Lines or Trunks
Use this procedure to establish alphanumeric system labels for display set
telephone users to identify the line or trunk being used.
Summary: Lines or Trunks
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure More
PC Procedure
Posted Message
Use this procedure to add or change existing posted messages. The posted
messages allow callers with display telephones to know why the called extension
does not answer.
Each posted message can have a maximum of 16 characters. Messages 2
through 20 can be changed through programming. Message 1, Do Not Disturb,
cannot be changed.
Summary: Posted Message
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
System manager
All
Not required
Form 2c, System Numbering: Line/Trunk Jacks
Not applicable
Not applicable
No
No
Drop Dial label
Type line/trunk no.
Type label
System manager, Integrated Administration
All
Not required
Form 8a, Label Form: Posted Message
First 10 messages
1 to 20
No
No
Dial line/trunk no.
Programming Procedures
2
+
4–315