AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 375

Basic System Operating Conditions
1 Select the System menu.
_
2 Select System Restart.
_
3 Respond to the query.
_
_
_
System Programming Position Assignment
Use this procedure to reassign the extension used for system programming. This
extension should not be the same extension as that used for the operator
position. The system programming position can be reassigned only to one of the
first five extension jacks on the first MLX module. Only one system programming
console is allowed per system.
>
To restart the system select
system restart screen appears.
To terminate the restart and return to the
System menu select
Exit Exit
.
The session is finished, and the system
restarts. You must enter system
programming again to continue.
Yes Yes
. The
No No
, then select
Programming Procedures
#
4–3