AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 210

Telephones
Console Display/Instructions
4 Save your entry. Then, continue to copy button assignments or go to Step 5.
Enter Enter
Select or
Next Next
Select
6 Return to the System Programming menu.
Exit Exit
Select two times.
Analog Multiline Telephone Without Built-in
Speakerphone (BIS) or Hands Free Answer
Intercom (HFAI) Capability
Use this procedure to identify analog multiline telephones with flat membrane
buttons that do not have built-in speakerphones (BIS) or Hands Free Answer
Intercom (HFAI) capability. The models that must be identified are 5-Button,
10-Button, 34-Button, and 34-Button Deluxe analog multiline models with flat
membrane buttons.
Keep the factory setting for analog multiline models with raised plastic buttons,
including the following models: 10-Button HFAI, 34-Button with speakerphone
(SP-34), 34-Button with speakerphone and display (SP-34D), BIS-10, BIS-22,
BIS-34, BIS-22D, and BIS-34D.
This procedure is not necessary for MLX or single-line telephones.
3–74
Common Administrative Procedures
Additional Information
Enter Enter
After selecting , you may continue
to copy button assignments from the
extension displayed on Line 1 to
additional extensions.
Next Next
After selecting , you may copy button
assignments from the next sequential
extension.
Return to Step 3 to continue programming. The
extension to be copied from will be displayed on
Line 1.
PC