AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 343

Labeling
Console Display/Instructions
3 Select Posted Message.
_
4 Enter the posted message number ( nn = 1 to 20).
5 Save your entry.
Select .
6 Erase the current message ( AAAAAAA ) if assigned.
NN
7 Enter the new message.
8 Save your entry.
Select .
9 Return to the System Programming menu.
Select two times.
Additional Information
Dial or type [ nn ].
xx = number entered in Step 4
Press Drop.
Use to toggle
between letters and punctuation.
Dial or type the message.
Note: , not .
Change additional messages by
repeating Steps 4 through 8.
Common Administrative Procedures
PC
2
3–207