AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 626

System Features
SMDR Account Code Format
For calls made using an authorization code, SMDR can be programmed to either
have the "home extension" or the actual authorization codes recorded in the
Account Code field if no Account Code is entered. Account Code overrides the
Authorization Code entry in the SMDR record when both features are used.
Summary: SMDR Account Code Format
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Inside Dial Tone
Use this procedure to set the inside (system) dial tone to be either different from,
or the same as, the outside line/trunk dial tone.
NOTE:
The inside dial tone must be the same as the outside dial tone when the internal
dial tone is not recognized by software applications or modems.
Summary: Inside Dial Tone
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
4–254
Programming Procedures
System manager
All
Not required
Form 8a, System Features
Home Extension Number
Home Extension Number, Authorization Code
No
No
or
System manager
All
Not required
Form 8a, System Features
Inside dial tone is different from outside dial tone
Inside, Outside
No
No
or
or
or