AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 398

Lines and Trunks
Procedure: Type of Trunk
Console Display/Instructions
1 Select the Lines and Trunks menu.
_
2 Select Loop-Start/Ground-Start/DS1.
_
3 Enter the slot number in the control unit that contains the module
( nn = 1 to 17).
4 Save your entry.
Select .
5 Specify the type of trunks connected to the module.
_
_
4–26
Programming Procedures
Module is: 400, 408, 408GS/LS-MLX,
800 GS/LS, or 800 GS/LS-ID.
Dial or type [ nn ].
NN
**** = 400, 408, 408-MLX, or 800 modules
xx = slot number entered in Step 3
_
_
Select
Or, select
Additional Information
or
and go to Step 6.
or
and go to Step 9.
PC