AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 506

PRI Facilities
Summary: B-Channel Groups
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To program a single line/trunk:
PC Procedure
Procedure: B-Channel Groups
Console Display/Instructions
1 Select the Lines and Trunks menu.
_
4–134
Programming Procedures
System manager
Hybrid/PBX, Key
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Not applicable
Group numbers (1 to 80)
Yes
No
group no. Dial B-channel slot and port nos.
Dial group no.
Dial line/trunk no.
To program a block of lines/trunks:
group no. Dial B-channel slot and port no.
Dial group no.
lines/trunks Toggle LED On/Off
To program a single line/trunk:
slot and port nos.
Type line/trunk no.
To program a block of lines/trunks:
slot and port nos.
specific lines/trunks Toggle letter
Additional Information
E
Select specific
Type group no. Type B-channel
Type group no.
Type group no. Type B-channel
Type group no.
On/Off
Dial
Dial
Select
PC