AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 542

PRI Facilities
Console Display/Instructions
8 Enter the dial prefix.
9 Continue to assign the dial prefix to another table or go to Step 10.
Select
10 Save your entry.
Select .
11 Return to the System Programming menu.
Select three times.
Special Services Tables
Eight tables provide for international calling and for operator-assisted calls.
Default tables include the special prefixes 0 and 00 for operator-assisted calls.
Dialed numbers are matched against entries in these tables for patterns (011,
010, 01, 00, 0, and 1); for operator assistance (operator-assisted, presubscribed
common carrier operator, and none); and for type of number (national or
international). Up to four digits can be deleted.
Summary: Special Services Tables
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To specify Pattern:
4–170
Programming Procedures
Additional Information
Dial or type [n].
Return to Step 7. The next table will be
displayed on Line 1.
System manager
Key and Hybrid/PBX
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
See Table 4–3
Prefix for international or operator-assisted calls
No
No
Dial entry no.
To specify Operator:
Dial entry no.
PC
Drop Dial pattern
Select type of operator