AT&T MERLIN LEGEND Release 3.1 System Programming Manual page 578

Auxiliary Equipment
Maintenance Alarms
Use this procedure to identify the line/trunk jack that connects an external
alerting device that sounds or flashes when major maintenance problems occur.
You cannot assign the line/trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its line/trunk
jack to connect a loudspeaker paging system or Music on Hold.
Summary: Maintenance Alarms
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Maintenance Alarms
Console Display/Instructions
1 Select the Auxiliary Equipment menu.
2 Select Maintenance Alarms.
_
4–206
Programming Procedures
System manager
All, but in Hybrid/PBX mode, the line/trunk designated for
the maintenance alarm cannot be assigned to a line/trunk
pool.
System idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk number
No
No
Type line/trunk no.
Additional Information
_
Dial line/trunk no.
PC