Night Service
Console Procedure To assign a calling group to a Night Service group:
PC Procedure
Night Service with Outward Restriction
Use this procedure to prevent unauthorized use of telephones after hours. This
feature requires the user to enter a password to make a call when Night Service
is activated, unless one of the lists below applies. It also requires an operator to
enter a password in order to manually activate Night Service.
To remove the password requirement follow the procedure below and delete the
current password (press the Drop button).
This procedure is also used to establish the following lists:
Emergency Allowed List. A list of telephone numbers that can be dialed
without a password.
Exclusion List. A list of extensions that are exempt from password
requirements.
NOTES:
1. A maximum of 10 telephone numbers can be included on the Emergency
Allowed List, each number with a maximum of 12 digits.
2. Extensions included in the Exclusion List keep normal call restrictions (if
any are assigned); however, they are not protected in any other way from
unauthorized use after hours.
3. AUDIX Voice Power jacks are automatically included on the Exclusion
List.
of Night Service attendant
To assign an extension to a Night Service group:
Night Service attendant
telephone
To assign a calling group to a Night Service group:
Type ext. no. of Night Service attendant
Type calling group no.
To assign an extension to a Night Service group:
Type ext. no. of Night Service attendant
Type ext. no. of telephone
Dial ext. no.
Dial calling group no.
Dial ext. no. of
Dial ext. no. of
Programming Procedures
4–311
Need help?
Do you have a question about the MERLIN LEGEND Release 3.1 and is the answer not in the manual?